DIY Stickers with Tape: Easy Homemade Decal Methods

DIY stickers with tape: easy homemade decal methods

Make your own stickers at home is a fun, creative project that doesn’t require expensive equipment or materials. With scarce some tape and a few basic supplies, you can create custom stickers for journals, laptops, water bottles, or gifts. This guide will walk you through several methods to make DIY stickers will use different types of tape.

Materials you will need

Will depend on which method you choose, you will need some combination of these supplies:

• Clear packing tape, wash tape, or ddouble-sidedtape
• Printed images or hand draw designs
• Scissors or craft knife
• Parchment paper or wax paper
• Water
• Small bowl
• Laminating sheets (optional )
• Regular printer paper or sticker paper
• Glue stick or white glue

Method 1: clear packing tape stickers

This is maybe the simplest method and work great for turn print images or drawings into waterproof stickers.

Step-by-step instructions:

1. 
   Prepare your design:
   
   Print out images on regular paper or create hand draw designs. Make sure the ink is totally dry before proceed.
2. 
   Apply tape:
   
   Cautiously place a piece of clear packing tape over your design, smooth out any air bubbles with your finger or a credit card. The tape should whole cover the image with a small border around it.
3. 
   Soak in water:
   
   Fill a bowl with warm water and submerge your tape image for astir 5 minutes.
4. 
   Remove paper backing:
   
   Once the paper is good to soak, lightly rub the paper side with your fingers. The paper will begin to will roll off, leave the ink will transfer to the adhesive side of the tape.
5. 
   Dry your sticker:
   
   Pat the sticker dry with a paper towel and let it bare dry altogether.
6. 
   Cut out:
   
   Use scissors to cut around your design, leave a small border of clear tape if desired.

Your sticker is immediately ready to use! The adhesive side of the tape will yet be sticky plenty to will adhere to most surfaces.

Method 2: double-sided tape stickers

This method create stickers with a professional feel and work advantageously for hand draw designs.

Step-by-step instructions:

1. 
   Create your design:
   
   Draw or print your design on regular paper.
2. 
   Apply double-sided tape:
   
   Cover the back of your design whole with double-sided tape.
3. 
   Cut out:
   
   Cautiously cut around your design.
4. 
   Remove backing:
   
   When ready to use, peel off the backing paper from the double-sided tape.

This method create stickers that can be store until need, as the adhesive remains protect by the backing paper until you’re ready to use them.

Method 3: laminated tape stickers

This method will create durable, waterproof stickers that will last longsighted on surfaces will expose to wear and tear.

Source: parentvault.com

Step-by-step instructions:

1. 
   Create your design:
   
   Draw or print your design on regular paper.
2. 
   Laminate front:
   
   Cover the front of your design with clear packing tape.
3. 
   Cut out:
   
   Cut around your design, leave a small border if desired.
4. 
   Apply adhesive:
   
   Cover the back with double-sided tape or apply a thin layer of white glue.
5. 
   Let dry:
   
   If you use glue, allow it to dry wholly before use your sticker.

These stickers are specially durable and great for items that might get wet, like water bottles or outdoor decorations.

Method 4: wash tape stickers

Wash tape come in countless patterns and colors, make it perfect ffor creatingdecorative stickers.

Step-by-step instructions:

1. 
   Select your wash tape:
   
   Choose a pattern or color that match your needs.
2. 
   Apply to parchment paper:
   
   Place strips of wash tape onto a piece of parchment or wax paper.
3. 
   Create designs:
   
   Cut the tape into shapes use scissors or use paper punches to create consistent shapes.
4. 
   Store until need:
   
   Keep your wash tape stickers on the parchment paper until you’re ready to use them.

Wash tape typically have a gentler adhesive, make these stickers perfect for temporary decoration or for surfaces where you don’t want to leave residue.

Method 5: contact paper stickers

Contact paper (clear adhesive shelf liner )work likewise to clear tape but come in larger sheets.

Step-by-step instructions:

1. 
   Prepare your design:
   
   Print or draw your design on regular paper.
2. 
   Apply contact paper:
   
   Cut a piece of contact paper slenderly larger than your design and cautiously place it over the front of your design, adhesive side downwards.
3. 
   Smooth out bubbles:
   
   Use a credit card or ruler to remove any air bubbles.
4. 
   Apply second layer:
   
   Place another piece of contact paper on the back of your design, adhesive side toward the paper.
5. 
   Cut out:
   
   Cautiously cut around your design.

This method create a sticker that’s seal on both sides, make it waterproof and durable.

Method 6: packing tape transfer stickers

This method work advantageously for transfer print images, particularly those print with a laser printer.

Step-by-step instructions:

1. 
   Print your design:
   
   Use a laser printer for best results. Ink-jet prints may smear.
2. 
   Apply tape:
   
   Place clear packing tape over your design, smooth out any bubbles.
3. 
   Burnish:
   
   Rub the tape unwaveringly with a spoon or credit card to transfer the ink to the tape.
4. 
   Soak:
   
   Place the tape image in warm water for 10 15 minutes.
5. 
   Remove paper:
   
   Lightly rub the paper backing until it come off, leave but the ink on the tape.
6. 
   Dry and cut:
   
   Allow your sticker to dry wholly before cut around the design.

This method create transparent stickers where simply the ink from your design show up on the final sticker.

Tips for better DIY tape stickers

• 
  Use high quality images:
  
  The clearer your original image or drawing, the better your sticker will look.
• 
  Remove air bubbles:
  
  Ever smooth out air bubbles when apply tape to prevent imperfections in your stickers.
• 
  Be patient when soaked:
  
  Don’t rush the paper removal process. It’s better to soak farseeing than to damage your design by rub overly firmly.
• 
  Consider sealing:
  
  For extra durability, consider apply a thin layer of mod Lodge or clear nail polish over your finished stickers.
• 
  Test adhesives:
  
  Different surfaces require different adhesive strengths. Test your stickers on a small area before apply them to valuable items.
• 
  Store decent:
  
  Keep unused stickers on back paper or parchment paper to maintain their stickiness.

Troubleshoot common issues

Stickers not stick good

If your homemade stickers aren’t adhere decent, try these solutions:

• Clean the surface good before apply
• Apply a thin layer of white glue to the back of the sticker
• Use stronger adhesive tape for the backing
• Press steadfastly and hold for 30 seconds when apply

Ink smearing during water soak

If your design smears when soak in water:

Source: pinterest.com

• Make sure ink is entirely dry before apply tape
• Use laser print images alternatively of ink-jet
• Try to use cooler water for soak
• Seal ink drawings with a light coat of hairspray before apply tape

Paper not come off entirely

If you’re having trouble remove all the paper backing:

• Soak for farseeing (up to 20 minutes )
• Softly rub with a soft toothbrush
• Add a drop of dish soap to the soak water
• Try to use thinner paper for your designs

Creative ideas for use your homemade stickers

Nowadays, that you know how to makeDIYy stickers with tape, here are some fun ways to use them:

• 
  Personalize school supplies:
  
  Decorate notebooks, folders, and pencil cases
• 
  Customize electronics:
  
  Add stickers to phone cases, laptops, or tablets
• 
  Enhance journaling:
  
  Create custom stickers for bullet journals or planners
• 
  Decorate gifts:
  
  Add homemade stickers to gift wrap or cards
• 
  Label organization bin:
  
  Make custom labels for storage containers
• 
  Personalize water bottles:
  
  Add waterproof stickers to hydration containers
• 
  Create window decorations:
  
  Use clear tape stickers on Windows for seasonal decor
• 
  Make temporary tattoos:
  
  Use skin safe adhesive for temporary body art

Take your DIY stickers to the next level

Once you’ve master basic tape stickers, you might want to try these advanced techniques:

• 
  Layered stickers:
  
  Create dimension by layer different elements
• 
  Glitter stickers:
  
  Add glitter between layers of tape for sparkly effects
• 
  Glow in the dark:
  
  Use glow paint in your designs before seal with tape
• 
  Scented stickers:
  
  Add a drop of essential oil to the adhesive side
• 
  Reusable stickers:
  
  Use special low tack adhesives for stickers that can be reposition

Conclusion

Make DIY stickers with tape is an accessible craft that offer endless creative possibilities. Whether you’re look to personalize your belongings, create custom decorations, or scarce enjoy a fun craft session, these methods provide an inexpensive way to make high quality stickers at home. With practice, you will develop your own techniques and preferences for will create the perfect homemade stickers.

Remember that the best part about DIY stickers is that they’re totally customizable — you can create incisively what you want preferably than search for the perfect store buy option. So gather your supplies, let your creativity flow, and start make your own unique stickers today!